Commit 4 renamed `[oauth_single_audience]` → `[login_flow]` via a global
sed pass, but ADR-025's example settings.toml already had a `[login_flow]`
section just above the `[keycloak]` block. The rename produced two
back-to-back `[login_flow]` headers with identical contents — TOML parsers
either reject the file or silently override, and a reader copying the
example would land on either outcome.
Dropped the now-duplicate second `[login_flow]` section (the renamed one).
The earlier `[login_flow]` section retains the same content + a comment
explaining the ADR-022 derivation, so no information is lost.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Same pattern as the ENABLE_LOGIN_FLOW removal in the previous commit:
the deployment mode (MCP_DEPLOYMENT_MODE) is the single source of truth
for selecting an auth flow. The ENABLE_MULTI_USER_BASIC_AUTH env-var
alias is redundant with `MCP_DEPLOYMENT_MODE=multi_user_basic`.
Unlike the ENABLE_LOGIN_FLOW removal — where silent removal was safe
because Login Flow v2 is the auto-detection default — silent removal
here would be a surprise: a user with only ENABLE_MULTI_USER_BASIC_AUTH=true
in their .env would auto-detect into LOGIN_FLOW after upgrade (wrong
runtime mode). Mitigation: detect_auth_mode now reads os.environ
directly for both legacy aliases and raises ValueError with a one-line
migration message if either is set. Applied retroactively to
ENABLE_LOGIN_FLOW as well — loud is better than silent.
- nextcloud_mcp_server/config.py:
- Drop the dynaconf env-var alias entry for ENABLE_MULTI_USER_BASIC_AUTH.
- Update the `enable_multi_user_basic_auth` field docstring to mark it
as derived / not user-settable.
- `_is_multi_user_mode()` (early-config helper, runs before Settings
is built) switched to checking MCP_DEPLOYMENT_MODE directly. Now
consistent with the canonical detection in detect_auth_mode.
- nextcloud_mcp_server/config_validators.py:
- Drop the auto-detection branch (`if settings.enable_multi_user_basic_auth`).
Selection of MULTI_USER_BASIC is now exclusively via the explicit
MCP_DEPLOYMENT_MODE branch.
- Add `enable_multi_user_basic_auth` to `_sync_derived_flags` alongside
`enable_login_flow` — both flags are now derived from the resolved mode.
- Drop `enable_multi_user_basic_auth` from
`MODE_REQUIREMENTS[MULTI_USER_BASIC].required` and from the
`forbidden` lists of SINGLE_USER_BASIC and LOGIN_FLOW (no longer
user input → no meaningful forbidden check).
- Add loud-deprecation `ValueError` block at the top of detect_auth_mode
that errors with a clear migration message when ENABLE_MULTI_USER_BASIC_AUTH
or ENABLE_LOGIN_FLOW is found in os.environ.
- tests/unit/test_config_validators.py:
- Switch ~10 fixtures from `enable_multi_user_basic_auth=True` to
`deployment_mode="multi_user_basic"` (mirrors `enable_login_flow`
treatment from the previous commit).
- Switch two `patch.dict(os.environ, {"ENABLE_MULTI_USER_BASIC_AUTH": "true"})`
blocks to use MCP_DEPLOYMENT_MODE.
- Rename `test_forbidden_multi_user_basic_auth` to
`test_forbidden_multi_user_basic_when_credentials_present` — the
scenario is now an explicit-mode + credentials conflict, not an
env-var-flag conflict.
- Add `test_legacy_enable_multi_user_basic_auth_env_var_errors` and
`test_legacy_enable_login_flow_env_var_errors` to exercise the new
loud-deprecation ValueError path.
- docker-compose.yml: mcp-multi-user-basic profile switched to
`MCP_DEPLOYMENT_MODE=multi_user_basic`.
- env.sample: replaced `#ENABLE_MULTI_USER_BASIC_AUTH=true` example with
`#MCP_DEPLOYMENT_MODE=multi_user_basic`.
- docs/authentication.md, configuration.md, troubleshooting.md,
auth-flows.md, webhook-management-guide.md,
configuration-migration-v2.md, ADR-025: replaced env-var examples
with the canonical MCP_DEPLOYMENT_MODE form.
- docs/ADR-020: marked partly superseded by ADR-022.
- CLAUDE.md: Multi-User BasicAuth section updated to set
MCP_DEPLOYMENT_MODE.
- nextcloud_mcp_server/vector/oauth_sync.py: module docstring updated.
BREAKING CHANGE: ENABLE_MULTI_USER_BASIC_AUTH is no longer read from
the environment, and setting it now raises a startup ValueError with
a migration message. Replace `ENABLE_MULTI_USER_BASIC_AUTH=true` with
`MCP_DEPLOYMENT_MODE=multi_user_basic`. The same loud-deprecation
check is also applied to the recently-removed ENABLE_LOGIN_FLOW —
replace with `MCP_DEPLOYMENT_MODE=login_flow` (or drop both;
`login_flow` is the auto-detect default when no other auth env vars
are set).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Once OAUTH_SINGLE_AUDIENCE was renamed to LOGIN_FLOW and the validation
gate ensured the only meaningful configuration was
`MCP_DEPLOYMENT_MODE=login_flow + ENABLE_LOGIN_FLOW=true`, the two
controls became redundant. Setting the mode is sufficient; the
ENABLE_LOGIN_FLOW env var doesn't add information.
This commit makes the deployment mode the single source of truth for
the Login Flow v2 toggle:
- `nextcloud_mcp_server/config.py`: drop the `ENABLE_LOGIN_FLOW`
dynaconf env-var alias. The `enable_login_flow` field stays as an
internal attribute so the 6 runtime call sites (app.py x4,
context.py, auth/scope_authorization.py) keep working unchanged.
Updated field docstring to flag it as derived.
- `nextcloud_mcp_server/config_validators.py`:
- Drop `enable_login_flow` from `MODE_REQUIREMENTS[LOGIN_FLOW].required`.
- Drop the validation gate that required ENABLE_LOGIN_FLOW=true for
LOGIN_FLOW mode (no longer possible to misconfigure — the flag is
derived, not user input).
- Add `_sync_derived_flags()` helper called at every return path of
`detect_auth_mode` to set `settings.enable_login_flow` from the
resolved mode.
- `tests/unit/test_config_validators.py`: drop `enable_login_flow=True`
from happy-path fixtures (no longer needed — detection sets it).
Repurpose `test_login_flow_requires_enable_login_flow_flag` into
`test_login_flow_mode_auto_derives_enable_login_flow_flag` which
asserts the new auto-derivation behaviour for both LOGIN_FLOW and a
non-LOGIN_FLOW mode.
- `docker-compose.yml`: remove `ENABLE_LOGIN_FLOW=true` from the
`mcp-login-flow` and `mcp-keycloak` profiles.
- `env.sample`: remove the ENABLE_LOGIN_FLOW reference; the comment
on `MCP_DEPLOYMENT_MODE` now notes the derived flag.
- `docs/configuration.md`, `docs/authentication.md`,
`docs/login-flow-v2.md`, `docs/auth-flows.md`,
`docs/troubleshooting.md`, `docs/ADR-025-*.md`: replace
ENABLE_LOGIN_FLOW=true examples and references with
MCP_DEPLOYMENT_MODE=login_flow.
BREAKING CHANGE: `ENABLE_LOGIN_FLOW` is no longer read from the
environment. Anyone who relied on `ENABLE_LOGIN_FLOW=true` to activate
Login Flow v2 should set `MCP_DEPLOYMENT_MODE=login_flow` instead (or
rely on it being the default when no other auth env vars are set).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Follow-up to the LOGIN_FLOW rename. The user-facing surface area —
env.sample, docker-compose.yml mcp-login-flow profile, migration
guide, ADR statuses, and the running.md boot-log examples — all need
to refer to `login_flow` rather than the deprecated
`oauth_single_audience` string.
- docker-compose.yml: add explicit MCP_DEPLOYMENT_MODE=login_flow to
the mcp-login-flow profile (no longer relying on auto-detection).
- env.sample: update the deployment-mode list and example, dropping
the removed `oauth_token_exchange` and pointing at ADR-022 for the
rename rationale.
- docs/ADR-022: flip Status to Accepted with a note that this PR
implements step 1 (rename + validation gate).
- docs/ADR-021: note that it has been partly superseded by ADR-022
(the oauth_single_audience naming is no longer accurate); cross-link.
- docs/ADR-025: drop oauth_single_audience/keycloak from the dynaconf
validator example and the [oauth_single_audience] TOML section.
- docs/configuration-migration-v2.md: bulk-replace oauth_single_audience
→ login_flow throughout (sed -i).
- docs/running.md: re-collapse the per-mode boot-log subsections (added
during the closed PR #786 workaround) back into a uniform
"<mode>"-substitution block — now correct after this PR's logging
cleanup at app.py:1172.
No code changes in this commit.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Incorporate reviewer feedback across three review rounds:
- Remove post_hooks from Phase 1 constructor; defer to Phase 4
- Fix Validator syntax: use condition=lambda instead of ne= kwarg
- Add MCP_DEPLOYMENT_MODE validator to catch typos at startup
- Add CRITICAL to LOG_LEVEL validator enum
- Make OTEL_TRACES_SAMPLER_ARG validation conditional on ratio samplers
- Add all missing provider env vars to settings.toml (Bedrock, Anthropic, Ollama, Simple)
- Add provider secrets to .secrets.toml.example
- Fix DynaconfDict import to stable public API path
- Strengthen ignore_unknown_envvars risk: CI lint check mandatory before Phase 2
- Document ValidationError vs ValueError breaking change in Phase 3
- Acknowledge environments=True legacy risk with mitigation
- Address root_path pip-install concern (intentional: pip uses env vars)
- Add enable_token_exchange to adapter example; note exhaustive field mapping
- Clarify Provider Registry is Phase 6 with explanation of os.getenv coexistence
- Improve test isolation fixture with teardown reload + _dynaconf visibility note
- Add Docker Compose volume mount host-file existence note
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
